VCBL-K2 125x75x100mm 360 Degree Rotating Vacuum Cup Pod for Schmalz Homag Weeke CNC Table

VCBL-K2 125x75x100mm 360 Degree Rotating CNC Vacuum Cup Pod

This VCBL-K2 vacuum pod is a 360 degree rotating suction block for console tables and vacuum clamping systems on Homag, Weeke, BIESSE, SCM and other nesting CNC centres. The pod head turns freely through a full 360 degrees, so the sealing lip can be aligned to the grain direction, the panel shape or the clamping point without unclamping the workpiece. The 125x75x100mm body uses the larger VCBL-K2 footprint, giving a wider sealing area for medium and large panels while keeping the same clamping position on the console base.

Key Dimensions

360 Degree Rotation

• The pod head rotates a full 360 degrees, so the sealing lip can follow narrow strips, curved parts and off-square blanks.
• The clamping point can be repositioned on the panel without moving the console base or releasing vacuum.
• Practical for mixed nesting batches where part orientation changes from sheet to sheet.
• The swivel joint stays sealed at every angle, so holding force is not lost while turning.

Features

• Larger 125 x 75 mm sealing area than the 120 x 50 pod, for heavier panels and higher lateral load.
• Two-stage sealing lip grips small parts and narrow offcuts inside the same pod.
• Rubber pad and inner sealing ring are replaceable, so a worn lip does not require a new pod.
• Machined body keeps the workpiece height repeatable after pod changes.
• Supplied with the sealing pad fitted, ready to install on the machine table.