VCBL-K2 130x30x100mm 360 Degree Rotating Vacuum Cup Pod for Schmalz Homag Weeke CNC Table

VCBL-K2 130x30x100mm 360 Degree Rotating Narrow Vacuum Cup Pod

This VCBL-K2 vacuum pod is a 360 degree rotating suction block built for narrow workpieces on console tables and vacuum clamping systems from Homag, Weeke, BIESSE, SCM and other nesting CNC centres. The slim 130 x 30 mm sealing face is intended for strips, rails, frame parts and edge pieces that are too narrow for a standard 120 x 50 or 125 x 75 pod. The head turns freely through a full 360 degrees, so the long axis of the sealing lip can be aligned with the strip direction before vacuum is applied.

Key Dimensions

360 Degree Rotation

• The pod head turns a full 360 degrees, so the 130 mm long sealing lip can be lined up with the strip direction.
• Rotation lets you change the clamping point along a rail or frame part without releasing vacuum.
• Practical when one console has to hold long narrow parts in different orientations in the same batch.
• The swivel joint stays sealed at every angle, so holding force is not lost while turning.

Features

• Slim 130 x 30 mm sealing face for strips, rails and narrow edge parts that a standard pod cannot grip.
• Two-stage sealing lip also holds short offcuts inside the same narrow footprint.
• Rubber pad and inner sealing ring are replaceable, so a worn lip does not require a new pod.
• Machined body keeps the workpiece height repeatable after pod changes.
• Supplied with the sealing pad fitted, ready to install on the machine table.